Ge 33709 4-device Universal Remote Codes [How to Program 2023]

I and my team tested almost every universal remote and we made the list of some best remotes so the GE universal remote also comes in the best remotes list as it operates up to 4 devices like TVs, DVD players, Blu-ray, cable/satellite receivers, etc.

This remote has several models but the most popular is the ge 33709 4-device universal remote however this model can control any brand of the device, furthermore just like other remotes, this will also work with the codes so you need to enter code to connect it with your device.

The codes are attached in the instruction paper that you will get when you purchase the remote, if you lost the instruction paper or you threw it without checking it then don’t worry because in this article I’m going to provide you all the codes that you can use to connect the remote.

Despite this, if you have purchased the remote for the first time and don’t know how to program it on the device then I will guide you with several ways in case the first method doesn’t work then you can try the second method. Hence without more delay let’s dive into the article.

GE33709 4-Device Universal Remote Codes

I’m listing the universal default codes that can be used to control any brands of any device however most of the devices work with the 4 digit codes but some require 3 and 5 digits codes so I’m sharing all the codes here, therefore, make use of all of the codes to program the remote.

I have seen some peoples asking that the remote loses signals while entering the code and we fail to enter the code correctly, however, to avoid this issue check the batteries of your remote if they are expired then install the new batteries and then program it on your device.

So with the help of these codes, your remote will be connected to your favorite device and you will be able to use all the remote buttons on the device like volume buttons to increase and decrease volume, channel up buttons to change the channels, and more.

How To Program GE 33709 4-Device Universal Remote

As I said that I will guide you for programming the remote on the device, so I’m listing all the steps below that you can apply to connect the remote with your device however there are several ways to connect it, so first try this method if this doesn’t work for you then you can try another method.

Before applying the steps I recommend you remove all the hindrances between the remote and the device because if any particle stops the signals of the remote then it will not respond properly and you will fail to control your device.

• First, you need to turn on the device that you want to control with the ge remote.
• Then press and hold the setup button.
• After that enter the 9-9-1 three-digit code.
• Now release the setup button and press the power button until the device turns off.

That’s all, now the remote will find the code in its library and will connect to your device automatically, however after completing the whole process turn on the device and try to apply all the remote keys on it to check it is working whether not although if it doesn’t work then follow the procedure again.

GE 33709 4-Device Universal Remote Manual

So you have found the code for your device but don’t know how to use it to control the device then this section will help you a lot because I’m going to share a stepwise guide to program the GE 33709 universal remote. Furthermore, this method is working on all of the devices whether it is a tv, DVD, VCR, or aux.

You just ensure to follow the steps carefully because any wrong step could be the cause of failure, also ensure to hold the remote straight to your device otherwise it will not be able to send the commands properly.

step-1 Turn the device on that you wish to control with the GE universal remote.

step-2 Then press and hold the setup button until the small light turns on the power button.

step-3 After that press the device button that you want to control with it, like TV, DVD, CBL, Aux.

step-4 Now enter the code related to your device. (The power button’s light will blink each time when you enter the code).

step-5 When you enter the code correctly the power button’s light will go off, which means the code has been entered successfully.

That’s it, now the ge 33709 4-device universal remote has been programmed with your device, use the remote keys on your device to check it is responding to all of the features or not, in case if it doesn’t respond yet then, no need to be worried about it, just follow the procedure again and use another code you will get several codes in the list.

GE 33709 4-Device Universal Remote Setup Codes

Usually, the ge 33709 4-device remote controller comes with a setup code list but if for any reason you don’t have a code then you can still program the remote on any of your devices because I’m going to share the codes below that you can use on any brand of the device to control it.

These are the ge universal remote setup codes that will help you to program the remote however after trying all the codes if your remote doesn’t work on your device then tell me the name of your gadget I will find the code for your device in my code list and will provide you as soon as I can.

Conclusion

This is the complete instruction article on ge 33709 4-device universal remote in which all the codes and possible ways of remote programming are attached, therefore when I thought to write an article about this topic then I used all the programming ways on this remote and checked the codes.

So after all the process, I found the best ways to program it and the 100% working remote codes, hence try each code of the list because in some cases if the first code does not work then the second or third code works. However, almost everything is well defined above.

But if you are confused at any point or you have a question in your mind then ask me in the comments section I will try my best to provide you the relevant answer to your question and clear all of your confusion. Now it’s over to you to try the codes to connect the remote to your favorite device.

We check and remove the codes that don’t help our visitors so if you get any not working code in the list then share them with me I will replace them with the working code, despite we accept the new codes too, so if you have a code that is not included in the list then share it with me I will add it to the list.