Orion Television Codes For All Models – Universal Remote Code

So when you purchase the universal remote you will get an instruction paper along with it in which all the codes attached, however, if you don’t have an instruction paper or you threw it without reading then no worries because in this article I’m going to share all the working codes.

All the remotes work with different codes like 3, 4, and 5 digits so I’m sharing all the codes here however after using the 3 and 4 digits codes if your remote doesn’t work then you can use 5 digits codes, other than this if you are programming the remote for the first time.

And don’t know how to use the code to program remote then you will get a step-by-step guide to program it, therefore make certain to read the article until the end so you don’t miss any working code and programming steps.

Orion TV Universal Remote Codes

I will be listing 3, 4, and 5 numbers codes in the below list so try all the codes one by one until your tv accepts it, but before entering the code check the batteries are present in the remote whether not if not, then put the batteries first and then use the remote.

These Orion tv universal remote codes are compatible with each model of the Orion tv like LED 3241, TV1329, TV26066, etc, however, these codes are universal default so almost all the remotes will work by using them. Although if your remote doesn’t work with these then tell me your remote name below.

Orion Tv Codes For RCA Universal Remote

As we know the RCA universal remote can control various devices so if you want to control your Orion tv with it then you have to use the below codes for syncing the remote, I have checked these codes and these are working with each model of the RCA remote.

GE Universal Remote Codes For Orion Television

The best feature of the Orion tv I like the most is it supports the universal remotes, doesn’t matter which brand of the remote you want to connect like spectrum remote, RCA remote as well as GE universal remote so in this section, I will share the codes for GE remote that you can use to connect the remote with your tv.

If you face any issue while using these codes like if the remote doesn’t work properly then check the batteries of the remote if they are outdated then remove them and put the new batteries because on the old batteries your remote will lose signals and you won’t be able to enter the code rightly.

How To Program a GE Universal Remote To an Orion Tv

As I said above that I will also guide you for programming the remote so if you got the GE universal remote in the above list and now want to use it on your tv to get control over it, well I’m sharing the instructions below follow each step carefully and don’t skip any of them otherwise you will not link the remote to your tv.

• First, you need to turn-on the Orion tv.
• Then on the GE universal remote press the Tv button once.
• After that press and hold the setup until the small light on the remote blinks twice.
• If the light blinks then release the setup button, (the remote is in the learning mode).
• Now pick the code from the above list and enter it with the remote’s number keys.
• After entering the code press and hold the power button.

That’s all, now the remote has been linked with your tv turn it on and apply all the remote keys on it to check it is working whether not if it doesn’t work yet, then follow the above process again and use another code I have listed various Orion television codes above.

After programming the remote if you face any issue like the remote key doesn’t respond to any of the tv features then don’t worried about it, sometimes it happens because the code that you have entered will not provide you access to that feature just change the code to use that feature.

Conclusion

After reading the Orion television codes article if you have any type of question or confusion in your mind then ask me below in the comments section I will try to give you the perfect answer to your question and will also try to clear all of your confusions.

In some cases, the remote that comes with an Orion tv is a universal remote fortunately if you got a universal remote then you can also control other devices with it like DVD, audio components, and more.

To check it is a universal remote or not, if it has “Set and Mode” buttons then it is a universal remote, if it does not have these two options then it is not a universal remote, but don’t worry you can connect any brand of the universal remote to your tv.

Now I want to listen to you which part of today’s article you like the most and which code helped you to connect the remote? don’t forget to share the code that helped you to do so, because it will help others to find the working code easily.

Other than this if you have codes that are not included in the above list then share them with me I will check if they working then I will add them to the list and your help will be much appreciated.